Back to solutions

Setting a Static IP address on a Magicard 600

Method 1- (recommended)


Install the Magicard printer driver on a pc using the USB connection.

Then on the PC go to control panel > devices and printers.

Right click the Magicard 600 icon and select Printer Properties

On the Network tab click the Ethernet button.

Tick the use static network setting check box.

The enter in the detail all the network details then click OK.

Then click Apply and OK to exit.

You will need unplug the power of the printer

Then plug in the Ethernet cable before you power the printer back on.

On a new PC do the Ethernet install and type in the IP address.

On the PC that you installed USB on you can just change the port doing the following procedure.


Step 1) Go to Devices and printer > right click the printer and select Printer Properties >Ports Tab > delete the TCP/IP port you have selected for the printer.

( Note: you have to check a different port then click apply then highlight the port you want to delete and click the delete button.)


Step 2) On the Ports Tab >click the Add Port button > add port wizard will come up

Select Standard TCP/IP port then click the New Port… button. Type in the IP address of the printer.

Let it search for the printer. It will not find it because the printer will not respond to its request.

Then select Standard- Generic Network Card. Click next and finish.


Step 3) Make sure the port you have created is selected, Click apply and OK and reboot your PC.