Non Magicard Badge Design and Printing Applications
Return to printer solutions | Printer drivers, firmware & software
Any applications can print to your Magicard printer via windows print (file > print).
However, the document size needs to be correct for the CR80 credit card size you will likely be printing onto.
CR80 is the standard size for an ID card and measures 86mm x 54mm.
It’s exactly the same size as a standard credit card and is the size accepted by the vast majority of ID card printers.
You will also need to make sure that your resolution is at 300dpi, anything less might print a bit pixelated.
Below is a list of none Magicard applications… If you need assitance with the application then hopefully it is listed for you below:
Magicard Badge design and Printing Applications
Magicard Applications |
Vendor |
Website and Notes |
| Trust IDv4 (Powered by CardExchange) | Card Exchange | https://www.cardexchangesolutions.com/trustid |
| PriceCardPro | Card Exchange | https://pricecardpro.com/support |
| Print an ID | Magicard | https://support.magicard.com/solution/introducing-neo-printanid/ |
| Design and Print | Magicard | https://support.magicard.com/solution/magicard-design-and-print/ |
| Trust ID v3 | Magicard | https://support.magicard.com/guides/TrustID%20V3/ |
| Magicard ID | Magicard | Long since obsolete. |
Global support centres
UK
Magicard Ltd (HQ)
Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom
USA
Brady (North America)
148 E. Stiegel St
Manheim, 17545
United States
Middle East
Magicard (Sales & Support Hub)
5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates
Europe
Brady (Belgium)
Industriepark
Lindestraat 20, 9240
Belgium
