Correct Printer Power Supply - 60w

Your Magicard printer must only be used with the correct Power Supply Unit (PSU) provided with the printer.

The wrong PSU can:

• Cause print related issues (commonly faint or light printing)
• Create errors (commonly 16:00 Can't lift print head)
• Permanently damage your printers Controller PCB
• Invalidate your printers warranty

The PSU must be exactly as shown below: 

All Enduro models & 1st Generation Pronto

 *Pronto ONLY if the serial number contains a letter, like: 12F1234      (not 8 digits, like 12345678)
The information on this page will help you identify which electronics version your Pronto was built with.

• Manufacturer: SUNPOWER
• DC Output: 24V 2.5A
• White 60w tag
• Part Number: P1-0034/R

The label on the PSU should be like this:
_{Click image to enlarge}