Correct Printer Power Supply - 90w

Written By Darren Garbett

Your Magicard printer must only be used with the correct Power Supply Unit (PSU) provided with the printer.

The wrong PSU can:

  • Cause print related issues (commonly faint or light printing)
  • Create errors (commonly 16:00 Can't lift print head)
  • Permanently damage your printers Controller PCB
  • Invalidate your printers warranty

The PSU must be exactly as shown below:


1st generation Rio Pro & All 2nd generation printers inc all product variants.  

Rio_Pro.png

*Pronto ONLY if the serial number is formatted as just 8 digits, like this: 12345678     (does NOT contain a Letter, like 12F3456)
The information on this page will help you identify which electronics version your Pronto was built with.

  PSU_90w_E9372_YellowTag.jpg
Click image to enlarge

  • Manufacturer: SUNPOWER
  • DC Output: 24V 3.75A
  • Yellow 90w tag
  • Part Number: E9372



The label on the PSU should be like this:
Click image to enlarge

PSU_90w_E9372_Label