Converting Rio / Tango 2e HoloKote to Rio Pro format.

Return to printer solutions | Holokote
Written By john.fieldsend

The Rio 2e & Tango 2e Printers offered HoloKote and HoloFlex option in the form of an encrypted memory flash key which is inserted into the front of the printer.

Each flash key has a Serial Number on the outside.

The Rio Pro (1st generation) also has the HoloKote / HoloFlex option but in the form of an encrypted RFID Card which slots into a dedicated space inside below the printers lid.

Each Holokote RFID key card has a Serial Number printed on the front.

Later (Generation 2) printers also benefit from Holokote but these are delivered electronically.

Need your old design on your new printer?

Contact your Magicard Reseller who can give you an accurate price.

Providing the Serial Number of your original Holokote Key to your Magicard Reseller will enable checks to be made to see if your artwork is suitable to re-use in a new Holokote design.

*You may also have to resubmit the original artwork or redesign, depending upon the format of the old and new models.

Why create an account?

Direct technical support

Create online support tickets with our industry leading and experienced support staff. Sign up

Register your products

Register your products with us for updates and warranty information. Register

What customers say about our support...

Alan Maxwell from Technical Support provided a very quick resolution for the problem of our MagiCard ID Printer. Excellent working and Thanks a lot!

Printer model: Rio Pro 360

Prompt response to issue. Instructions provided resolved issue immediately.

Printer model: Department of Health Magicard 300

The issue I had with the printer was resolved with speed and professionalism.

Printer model: Magicard 300

Same day reply and gave all the information I could need to fix the issue I had and it worked first time

Printer model: Rio Pro 360

Customer service were very patient and helpful when communicating with me to figure out the problem with the machine! Thank you for the repair, printer works again! It did take a little longer than expected to get it back, about three weeks instead of two.

Printer model: Enduro3e

Global support centres


Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom


148 E. Stiegel St
Manheim, 17545
United States

Middle East

5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates