PriceCardPro range: Flex, Flex360 or Flex+

Return to printer solutions | Printer drivers, firmware & software
Written By Luke Ridgway

This page will help you confirm which PriceCardPro Flex you have, Flex or Flex 360…  or a Flex+ 🤓

PriceCardPro range

 

The firmware you will need for your printer depends on the model’s architecture.

This can be simplified into Generation 1 (Flex) and Generation 2 (Flex 360 & Flex+)

Generation 1

Generation 2

Flex

PriceCardPro Flex 360

 

Flex 360

PriceCardPro Flex 360

 

Flex+

PriceCardPro Flex +

 

Firmward Page:
https://support.magicard.com/solution/magicard-rio-pro-firmware/

Firmware Page:
https://support.magicard.com/solution/magicard-rio-pro-360-firmware/

The PCP Flex is based on the Generation 1 Rio Pro

‏‏‎The Rio Pro was updated with new electronic architecture becoming the Rio Pro 360.  The PCP Flex 360 naturally become the new PriceCardPro variant of the Rio Pro 360.

 

 

‏‏PriceCardPro Flex+ is a product variant based on the Magicard D printer.

3652-0…

  • 3652-0008-PR  PriceCard Pro FLEX PRINTER
  • 3652-0009-PR  PriceCard Pro FLEX (50mm) PRINTER

‏‏‎ 3652-3…

  • 3652-3008-PR  PriceCard Pro FLEX 360 PRINTER
  • 3652-3009-PR  PriceCard Pro FLEX 360 (50mm) PRINTER
  • 3652-3028-PR  PriceCard Pro FLEX 360 DUO PRINTER
  • 3652-3029-PR  PriceCard Pro FLEX 360 DUO (50mm) PRINTER

‏‏‎ ‎4500-0…

  • 4500-0029-PR   PriceCardPro FLEX+ DUO 50mm
  • 4500-0009-PR   PriceCardPro FLEX+ 50mm
  • 4500-0028-PR   PriceCardPro FLEX+ DUO 54mm
  • 4500-0008-PR   PriceCardPro FLEX+ 54mm

 

Why create an account?

Direct technical support

Create online support tickets with our industry leading and experienced support staff. Sign up

Register your products

Register your products with us for updates and warranty information. Register

What customers say about our support...

Same day reply and gave all the information I could need to fix the issue I had and it worked first time

Printer model: Rio Pro 360

Thank you so much! The ID printer is working great and we really appreciate the honesty of your technicians! We could have easily been billed for repairs that weren't done, as our printer is no longer under warranty, but you didn\'t charge us at all. The technician superstar told me that it was a simple loose wire, which he reattached, and they shipped it back at no charge. Thank you!

Printer model: Pronto

Customer service were very patient and helpful when communicating with me to figure out the problem with the machine! Thank you for the repair, printer works again! It did take a little longer than expected to get it back, about three weeks instead of two.

Printer model: Enduro3e

Alan M was a fab help! Quick to help and even called me back when we were cut off due to a power cut on my end! Called him back the following week and he remembered me and the problem i was having. Thanks Alan!!

Printer model: Pronto

In all fairness, as my question was the opposite of what MagiCard would like to achieve I wasn't really expecting a comprehensive answer. Even though I did not get a solution to my question, the answer was well formulated and even offered some alternatives inducing the effect the alternative would have to the print quality.

Printer model:

Global support centres

UK

Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom

USA

148 E. Stiegel St
Manheim, 17545
United States

Middle East

5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates