Support for your PCP FLEX

 Back to product selection

PCP FLEX product image
Support for 1st Generation PCP Flex printers: Part number 3652-0___-PR

Browse solutions for PCP FLEX

Search:
PriceCardPro Flex Printer Firmware
The Firmware for your PriceCardPro Flex can be downloaded from the pages linked below. There are 2 Flex model types:  'Flex' and 'Flex 360' Pr...
Read more
Error 16:00 - Can't lift head
When I connect the power lead my printer makes no noise - going straight to the Error 16:00 Q. Did you recently move office or move the printer and P...
Read more
Printers Currently Supported for Out of Warranty Repairs
Magicard Ltd.’s intentions are to support / repair a product for five years after last date of manufacture where possible. *Legacy printers not l...
Read more
Out of Warranty Repairs
If your printer is out of warranty and in need of repair we can still help to ensure it continues to print cards. There is very little we cannot fix...
Read more
PriceCardPro Printer Driver
PriceCardPro Printer Driver:  v2.4.1.191 Release Date: 16/11/2020 This is the latest Unified Driver for the range of PCP printers of all...
Read more
Can't Find Panel Error Code 11:00
Generation 1 Rio Pro Error 11:00 on the indicates that the printer struggled to detect the dye film panels. The Rio Pro dye film LED's & sens...
Read more
Out of Dye Film Error 08:09
Error 08:09 means the Rio Pro (Generation 1) knows the the dye film is turning but struggling to see the color panels of the film. This error is...
Read more
Cleaning the Rio Pro
Here's a video on cleaning your Rio Pro and keeping it in great working order. We recommend to follow this full process at every dye film change...
Read more
Correct Cleaning Card for your Magicard Printer
It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for speci...
Read more
Error 24:24
Error 24:24 is raised when feeding a card from the hopper if the printer sees the mid sensor block before the rear one does.  This can mean either th...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Print to File
To obtain a Print-to-file (aka .PRN) Some applications (like MS Word) show a Print to File option in the printers list... otherwise follow th...
Read more
Soak Test
Note: This specific routine is only for Rio Pro (generation 1) printer variants. Before the actual Soak test please ensure your pri...
Read more
Query File
To obtain a Printer Query File - Windows PC only Via Printer Properties - Tools Tab (Generation 1 & 2 printers) Navigate through the fo...
Read more
White Line across printed card | Damaged Printhead Element
If printer cleaning is not carried out as advised the chance of printing problems and printhead damage is greatly increased. Cleaning recommenda...
Read more
Light or Faint Printing
Faint or very lightly printed cards are most often caused when the incorrect Power Supply has been connected to the printer. Q. Did you recently mo...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
Set Rio Pro to Hand Feed Mode
On the Printer select Menu Button Press the down button to scroll to Hand feed Then press the right arrow button to select. From this...
Read more
ID Card Printer Support Utility
This utility is intended for use as an advanced diagnostic and set-up tool, including setting up your Ethernet settings. Please do not use it to ad...
Read more
TeamViewer Remote Help
Please select your operating system below. Clicking the image will open a new tab and automatically begin the download from the Teamviewer site....
Read more
Flipper or Flip Mech Issues error code 4:07 / 04:09
The most common reason for these error codes is if the card has slipped on the main print roller during the printing process.  So the cause is likel...
Read more
Dye film sticking to card or breaking ribbon
If the main print roller is not perfectly clean then the following can result: The card can slip during the printing process, causing: The...
Read more
Error 24:08
Error 24:08 is only generated if you have the printer set to Hand Feed (on) and the rear card sensor is blocked.   If you are hand feeding y...
Read more
Error 24:03
When the error 'General Error 24:03 Please contact Technical Support' is seen the problem can be resolved by upgrading to the latest firmware. The...
Read more
Correct Cleaning Card for your Magicard Printer
It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for speci...
Read more
Print to File
To obtain a Print-to-file (aka .PRN) Some applications (like MS Word) show a Print to File option in the printers list... otherwise follow th...
Read more
Query File
To obtain a Printer Query File - Windows PC only Via Printer Properties - Tools Tab (Generation 1 & 2 printers) Navigate through the fo...
Read more
Set Rio Pro to Hand Feed Mode
On the Printer select Menu Button Press the down button to scroll to Hand feed Then press the right arrow button to select. From this...
Read more
PriceCardPro Flex Printer Firmware
The Firmware for your PriceCardPro Flex can be downloaded from the pages linked below. There are 2 Flex model types:  'Flex' and 'Flex 360' Pr...
Read more
PriceCardPro Printer Driver
PriceCardPro Printer Driver:  v2.4.1.191 Release Date: 16/11/2020 This is the latest Unified Driver for the range of PCP printers of all...
Read more
ID Card Printer Support Utility
This utility is intended for use as an advanced diagnostic and set-up tool, including setting up your Ethernet settings. Please do not use it to ad...
Read more
TeamViewer Remote Help
Please select your operating system below. Clicking the image will open a new tab and automatically begin the download from the Teamviewer site....
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Dye film sticking to card or breaking ribbon
If the main print roller is not perfectly clean then the following can result: The card can slip during the printing process, causing: The...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
Error 24:08
Error 24:08 is only generated if you have the printer set to Hand Feed (on) and the rear card sensor is blocked.   If you are hand feeding y...
Read more
Soak Test
Note: This specific routine is only for Rio Pro (generation 1) printer variants. Before the actual Soak test please ensure your pri...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
Flipper or Flip Mech Issues error code 4:07 / 04:09
The most common reason for these error codes is if the card has slipped on the main print roller during the printing process.  So the cause is likel...
Read more
Dye film sticking to card or breaking ribbon
If the main print roller is not perfectly clean then the following can result: The card can slip during the printing process, causing: The...
Read more
Cleaning the Rio Pro
Here's a video on cleaning your Rio Pro and keeping it in great working order. We recommend to follow this full process at every dye film change...
Read more
Correct Cleaning Card for your Magicard Printer
It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for speci...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
ID Card Printer Support Utility
This utility is intended for use as an advanced diagnostic and set-up tool, including setting up your Ethernet settings. Please do not use it to ad...
Read more
PriceCardPro Printer Driver
PriceCardPro Printer Driver:  v2.4.1.191 Release Date: 16/11/2020 This is the latest Unified Driver for the range of PCP printers of all...
Read more
Correct Cleaning Card for your Magicard Printer
It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for speci...
Read more
Soak Test
Note: This specific routine is only for Rio Pro (generation 1) printer variants. Before the actual Soak test please ensure your pri...
Read more
Can't Find Panel Error Code 11:00
Generation 1 Rio Pro Error 11:00 on the indicates that the printer struggled to detect the dye film panels. The Rio Pro dye film LED's & sens...
Read more
Out of Dye Film Error 08:09
Error 08:09 means the Rio Pro (Generation 1) knows the the dye film is turning but struggling to see the color panels of the film. This error is...
Read more
Dye film sticking to card or breaking ribbon
If the main print roller is not perfectly clean then the following can result: The card can slip during the printing process, causing: The...
Read more
Error 24:03
When the error 'General Error 24:03 Please contact Technical Support' is seen the problem can be resolved by upgrading to the latest firmware. The...
Read more
Error 16:00 - Can't lift head
When I connect the power lead my printer makes no noise - going straight to the Error 16:00 Q. Did you recently move office or move the printer and P...
Read more
Can't Find Panel Error Code 11:00
Generation 1 Rio Pro Error 11:00 on the indicates that the printer struggled to detect the dye film panels. The Rio Pro dye film LED's & sens...
Read more
Out of Dye Film Error 08:09
Error 08:09 means the Rio Pro (Generation 1) knows the the dye film is turning but struggling to see the color panels of the film. This error is...
Read more
Error 24:24
Error 24:24 is raised when feeding a card from the hopper if the printer sees the mid sensor block before the rear one does.  This can mean either th...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Query File
To obtain a Printer Query File - Windows PC only Via Printer Properties - Tools Tab (Generation 1 & 2 printers) Navigate through the fo...
Read more
Flipper or Flip Mech Issues error code 4:07 / 04:09
The most common reason for these error codes is if the card has slipped on the main print roller during the printing process.  So the cause is likel...
Read more
Error 24:08
Error 24:08 is only generated if you have the printer set to Hand Feed (on) and the rear card sensor is blocked.   If you are hand feeding y...
Read more
Error 24:03
When the error 'General Error 24:03 Please contact Technical Support' is seen the problem can be resolved by upgrading to the latest firmware. The...
Read more
Flipper or Flip Mech Issues error code 4:07 / 04:09
The most common reason for these error codes is if the card has slipped on the main print roller during the printing process.  So the cause is likel...
Read more
Dye film sticking to card or breaking ribbon
If the main print roller is not perfectly clean then the following can result: The card can slip during the printing process, causing: The...
Read more
Error 16:00 - Can't lift head
When I connect the power lead my printer makes no noise - going straight to the Error 16:00 Q. Did you recently move office or move the printer and P...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Query File
To obtain a Printer Query File - Windows PC only Via Printer Properties - Tools Tab (Generation 1 & 2 printers) Navigate through the fo...
Read more
Light or Faint Printing
Faint or very lightly printed cards are most often caused when the incorrect Power Supply has been connected to the printer. Q. Did you recently mo...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
Error 16:00 - Can't lift head
When I connect the power lead my printer makes no noise - going straight to the Error 16:00 Q. Did you recently move office or move the printer and P...
Read more
Printers Currently Supported for Out of Warranty Repairs
Magicard Ltd.’s intentions are to support / repair a product for five years after last date of manufacture where possible. *Legacy printers not l...
Read more
Out of Warranty Repairs
If your printer is out of warranty and in need of repair we can still help to ensure it continues to print cards. There is very little we cannot fix...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Query File
To obtain a Printer Query File - Windows PC only Via Printer Properties - Tools Tab (Generation 1 & 2 printers) Navigate through the fo...
Read more
White Line across printed card | Damaged Printhead Element
If printer cleaning is not carried out as advised the chance of printing problems and printhead damage is greatly increased. Cleaning recommenda...
Read more
Light or Faint Printing
Faint or very lightly printed cards are most often caused when the incorrect Power Supply has been connected to the printer. Q. Did you recently mo...
Read more
Error 02:00 | Out of Cards
In nearly all cases this error will be raised because the rear feed roller requires a thorough clean. Cleaning Videos Find more prin...
Read more
Set Rio Pro to Hand Feed Mode
On the Printer select Menu Button Press the down button to scroll to Hand feed Then press the right arrow button to select. From this...
Read more
Error 16:00 - Can't lift head
When I connect the power lead my printer makes no noise - going straight to the Error 16:00 Q. Did you recently move office or move the printer and P...
Read more
Correct Cleaning Card for your Magicard Printer
It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for speci...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
Print to File
To obtain a Print-to-file (aka .PRN) Some applications (like MS Word) show a Print to File option in the printers list... otherwise follow th...
Read more
White Line across printed card | Damaged Printhead Element
If printer cleaning is not carried out as advised the chance of printing problems and printhead damage is greatly increased. Cleaning recommenda...
Read more
Light or Faint Printing
Faint or very lightly printed cards are most often caused when the incorrect Power Supply has been connected to the printer. Q. Did you recently mo...
Read more
Correct PSU Power Supply
Your Magicard printer must only be used with the correct Power Supply.   The wrong PSU can: Cause Faint or Light Printing: https://suppo...
Read more
White Line across printed card | Damaged Printhead Element
If printer cleaning is not carried out as advised the chance of printing problems and printhead damage is greatly increased. Cleaning recommenda...
Read more
Light or Faint Printing
Faint or very lightly printed cards are most often caused when the incorrect Power Supply has been connected to the printer. Q. Did you recently mo...
Read more
Out of Warranty Repairs
If your printer is out of warranty and in need of repair we can still help to ensure it continues to print cards. There is very little we cannot fix...
Read more

Still there?

You will be automatically signed out in a few seconds.